Revit Window Family Blocks - IRC R310 Egress Window Library, 13 Dimensioned Blocks (DXF, mm)

Thirteen window blocks drawn at true US call sizes in millimetres - six elevations, two wall plans, a casement plan with a 90 degree swing, a sill-height section and an IRC R310 net clear opening gauge - each one carrying its code figure as text on the drawing. At 20 minutes of drafting per block that is 4 hours 20 minutes of board time you do not repeat on the next job.

3050 Single Hung Window - Elevation
Window in 2x4 Stud Wall - Plan
3050 Double Hung Window - Elevation
3040 Single Hung Window - Elevation
2650 Casement Window - Elevation
6040 Slider XO - Elevation
6050 Fixed Picture Unit - Elevation
3020 Awning Window - Elevation

Get the complete version $100

This page is the working piece. The full pack has everything below.

Send it to me
Get the steps by email
We send the link and three steps to a first result now, then a real example and what the full version adds over the next week, and one email if a rule behind this tool changes. No newsletter.
ENDEJAESPT

Find a tool